Herunterladen Inhalt Inhalt Diese Seite drucken

Berkel Volano B2 Gebrauchsanleitung Seite 7

Mit schwungrad
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
flywheel in its junction to the
tree (5);
- briefly activate the flywheel.
For lubrication only use acid
free oil (we recommend Vase-
line oil). Do not use vegetable
oil.
SERVICE
No user-serviceable parts are
inside. Refer servicing to qual-
ified personnel. All the repair
and replacement operations
(like blade replacement, repair
of structural parts, repair and/
or re-placement of sub-base-
plate components, or similar)
shall be executed exclusively
by personnel authorized by the
manufacturer.
In the event service is need-
ed, you may return your food
slicer to the manufacturer or
to one of the Authorized Ser-
vice Centers. For information
about service, centers please
contact us at:
service@berkelinternational.com.
WARNING: risk of in-
!
jury from sharp blade!
The blade replacement is
mandatory if distance be-
tween the edge of the blade
and the internal edge of the
guard exceeds 6 mm.
WARRANTY AND
RESPONSIBILITY
The manufacturer supplies The
manufacturer
supplies
chines with a limited war-ranty
of 24 months from the pur-
chasing date. The warran-ty is
extended only to defects that
arise under intended use condi-
tions and proper use. The war-
ranty does not cover defects
resulting from faults caused by
transport, purchas-er's incom-
petence or negligence, improp-
er installation, unauthorised
interventions, natural wear
and tear greater than 10% of
the nominal value. More-over,
the warranty does not cover
components intrinsically sub-
ject to wear, such as blades and
grinders, except in the event
of evident manufactur-ing de-
fects.
The manufacturer declines any
direct and indirect responsibil-
ity coming from:
- failure to observe the in-
structions in this manual;
- use which does not conform
to prevailing specific regula-
tions in the country of instal-
lation;
- unauthorized modifications
and/or repairs carried out on
the machine;
- use of non-original accesso-
ries and replacement parts;
- exceptional events.
Transfer of ownership of the
machine
automatically
faults the manufacturer's lia-
bility for the machine in ques-
tion.
The Identification tag on the
base-plate indicates manufac-
turer, machine, technical infor-
mation.
ma-
de-
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis