Elcometer MTG6 Gebrauchsanleitung Seite 27

12 REVIEWING BATCH DATA (continued)
12.2 BATCH READINGS (Batch/Review Batch/Readings)
Displays the reading value together with
date and time stamp for each individual
reading in the batch and the cell
reference (A1, B3, etc) where the
measurement was taken (for grid type
batches).
é ê
Press the softkeys to scroll through
the readings and è to move to the next
information screen.
Readings outside any enabled limits for
the batch are displayed in red with the
appropriate limit icon to the left of the
reading, ( ) if the reading is below the
low limit and (
12.3 BATCH GRAPH (Batch/Review Batch/Batch Graph)
Allows the users to view the readings within the batch as a column bar
graph. Up to five horizontal axes as displayed representing different
values / statistics as follows:
Highest reading in the batch (Hi:)
Ÿ
Lowest reading in the batch (Lo:)
Ÿ
Average reading for the batch (X:)
Ÿ
Low Limit (
Ÿ
High Limit (
Ÿ
e
For batches of more than one reading.
www.elcometer.com
) if above the high limit.
);
when set and enabled
);
when set and enabled
e
e
e
R
en-26