Elcometer MTG6 Gebrauchsanleitung Seite 25

11 BATCHING (continued)
11.1 CREATING A NEW BATCH
Users can create a sequential batch (MTG6 & MTG8) or a grid batch
(MTG8 only):
Sequential batching; list based storage of readings.
Ÿ
Grid batching; readings are taken and stored in a grid / table
Ÿ
format. The user defines the number of rows and columns and
the direction in which readings are taken and stored.
To create a new sequential batch:
1 Press Batch/New Batch/Batch Type.
é ê
2 Use the
To create a new grid batch (MTG8 only):
1 Press Batch/New Batch/Batch Type.
é ê
2 Use the
é ê
3 Use the
'Select' to toggle between across columns (è) or down rows ( ).
é ê
4 Use the
'Select' then use the
required and press 'Ok'.
é ê
5 Use the
'Select' then use the
columns required and press 'Ok'.
The maximum number of columns available is dependent on the number
4
of rows selected and vice versa.
For example:
a) Increment Direction = Across,
Number Of Rows = 3,
Number Of Columns = 3.
The first reading will be saved in cell A1, the
second A2, the third A3, the fourth B1 and so on.
b) Increment Direction = Down,
Number Of Rows = 3,
Number Of Columns = 3.
The first reading will be saved in cell A1, the
second B1, the third C1, the fourth A2 and so on.
www.elcometer.com
sofkeys to highlight 'Sequential' and press 'Select'.
sofkeys to highlight 'Grid' and press 'Select'.
sofkeys to highlight 'Increment Direction' and press
softkeys to highlight 'Number Of Rows', press
é ê
softkeys to enter the number of rows
softkeys to highlight 'Number Of Columns', press
é ê
softkeys to enter the number of
R
ê
è
A1 A2 A3
B1 B2 B3
C1 C2 C3
ê
A1 A2 A3
B1 B2 B3
C1 C2 C3
en-24