Werbung
9. Locking the horizontal damping system
To enable horizontal damping, turn the lever
completely to the left in the direction of travel
[ON].
To disable horizontal damping, turn the lever
completely to the right in the direction of
travel [OFF].
NOTICE
After horizontal damping has been disabled, check that the seat is securely locked by
moving the seat cushion backwards and forwards.
10. Adjusting the seat cushion length
Pull the handle situated at the front in the
centre below the seat cushion upwards as far
as it will go.
The seat cushion is now unlocked and can be
moved backwards and forwards in 10 mm stag-
es up to 60 mm by shifting your body weight.
NOTICE
Please make sure that there are no objects in the gap between the backrest and seat
cushion, as these might impede the functioning of the safety belt.
11. Armrests
With the help of the rotary knob, the armrest
tilt can be adjusted according to your require-
ments.
At the same time, the weight should be taken
off the armrest by raising it slightly.
The armrest can also be folded back com-
pletely to make it easier to leave the seat.
NOTICE
In the case of vehicles with manual transmission, it is possible that the gear lever may collide
with the armrest. In this case, the armrest must be folded up while the vehicle is moving.
34
Quicklinks ausblenden:
Werbung
Kapitel
