Cleaning & Servicing; Uninstall, Forward & Store - Heidolph Synthesis 1 Betriebsanleitung

E
RZ= aaa,bbb,ccc,ddd,eee,fff,ggg,hhh,iii
answer: RZ(x,y)=aaa,bbb,ccc,ddd,eee,fff,ggg,hhh,iii
Note: ramp number / zone need to be set before
x=ramp number,y=ramp zone
RT= aaa,bbb,ccc,ddd,eee,fff,ggg,hhh,iii
answer: RT(x,y)=aaa,bbb,ccc,ddd,eee,fff,ggg,hhh,iii
Note: ramp number / zone need to be set before
x=ramp number,y=ramp zone
Interface parameters: 9600 Baud, no parity, 8 bit, 1 stop bit.
RS 232 interface being active, all controls and displays of the item remain active
-
and serviceable.
Cleaning: wipe housing surfaces clean with a damp cloth (add some sort of mild
liquid soap).
Note
To avoid damage to the surface finish, avoid using chlorine bleach,
chlorine-based detergents, abrasive substances, ammonia, rags or
cleaning agents containing metal particles.
The item is maintenance-free. Repair work is limited to technicians authorized or
appointed by Heidolph Instruments. Please call your local Heidolph Instruments
Dealer or a Heidolph Instruments Field Representative
Disassembly
Turn item OFF and disconnect mains plug.
1.
Remove all of the hardware arranged around the shaker to ease disassembly.
2.
Unload all reaction vessel from reaction block, uninstall optional equipment.
3.
Forward & Store
1. We recommend to store the item and its components in its original box, or a
similar container that offers adequate protection against damage in transit.
Tape the box securely.
2. Store the item in a dry place.
ramp values, time
ramp values, temperature
CLEANING & SERVICING
UNINSTALL, FORWARD & STORE
102