Cleaning & Servicing; Uninstall, Forward & Store; Disposal; Malfunction - Heidolph MR 3003 control Betriebsanleitung

Cleaning: wipe housing clean with a damp cloth (add some sort of mild liquid soap).
Note
To avoid damage to the surface finish, avoid using chlorine bleach, chlorine-
based detergents, abrasive substances, ammonia, rags or cleaning agents con-
taining metal
The item is maintenance-free. Repair work is limited to technicians approved or appointed by Heidolph
Instruments. Please call your local Heidolph Instruments dealer or a Heidolph Instruments field represen-
tative (also refer to page 35).
Uninstall
Turn the item OFF and disconnect mains plug.
Forward & Store
1. We recommend to store the item and its components in its original box, or a similar container that
offers adequate protection against damage in transit. Tape the box securely.
2. Store the item in a dry place.
Caution
Do not jolt or shake the item during transport.
For disposal, please comply with your local or national regulations.
Split by metal, plastic, etc.
Packing material to be treated as described above (material split).
power switch dim:
• check power supply and power cord
won't stir:
• no magnetic paddle in stirring bath
• speed control knob in extreme left position (CCW)
• interface not connected as specified (refer to para. 7 „interface connection")
won't heat:
• check error messages displayed (refer to para. 8 „error messages and remedy")
• interface not connected as specified (refer to para. 7 „interface connection")
F2 - F10 error displayed:
• refer to para. 8 „error messages and remedy" under „operation & controls"
In case of a malfunction you cannot repair as described above, get in touch with your authorized Hei-
dolph Instruments dealer.
CLEANING & SERVICING
particles.
UNINSTALL, FORWARD & STORE

DISPOSAL

MALFUNCTION

E
33