Mittelmann UniDrive Originalbetriebsanleitung / Prüfbuch Seite 79

Original Operating Instructions UNIDRIVE
the accredited certification body, DEKRA EXAM GmbH with the identification number 0158, Dinnen-
dahlstr. 9, 44809 Bochum.
The UNIDRIVE working device has been tested and approved as a system in accordance with the
Machinery Directive 2006/42/EC. Every change to the system is life-threatening and leads to the loss
of the approval and the loss of the liability of the manufacturer.
18.2 Associated Documentation
Supplementary to these original operating instructions, all individual operating instructions – especially
warning information – of the components of the UNIDRIVE must be read and understood before
commissioning.
The individual operating instructions are:
of the guided-type fall arrester including flexible anchor lines in accordance with EN 353-2 with
•
approval for use over edges and with appropriate connecting element length,
of the full body harness in accordance with EN 361,
•
of the connecting elements in accordance with EN 362
•
Page 35