Replacing A Fuse - GGP ITALY 98SD Gebrauchsanweisung

34
EN
6.3.4 Replacing the bulbs (if present)
The bulbs (18W) have a bayonet fitting and are installed
in the bulb holder which can be taken out by turning it
anti-clockwise with pliers.

6.3.5 Replacing a fuse

The machine is fitted with fuses (1) with different capacities and functions. Specifically:
– 10 A fuse = protects the main and power cir-
cuits of the electronic circuit board. When it
blows, the machine stops and the dashboard
light switches off.
– 25 A fuse = protects the battery charger cir-
cuit. When it blows, the battery gradually runs
out and the machine will have problems start-
ing.
The fuse capacity is indicated on the fuse.
IMPORTANT
be replaced by one of the same type and
ampere rating, and never with one of another
rating.
If problems persist, contact Your Dealer.
A blown fuse must always
MAINTENANCE
1
1