GGP ITALY 98SD Gebrauchsanweisung Seite 64

22
EN
Mechanical transmission
( 4.21) and move the gear change lever into 1st gear (
Keep the pedal pressed down and release the parking brake. Slowly release the
pedal to shift from «brake» to «clutch», thus operating the rear wheels (
WARNING!
engagement may cause the vehicle to tip over and the driver to lose control.
Gradually reach the desired speed using the throttle and gear lever. To change gear,
press the clutch halfway down (
Hydrostatic transmission
brake pedal (
Press the drive pedal (
gressively increasing pressure on the pedal and moving the accelerator.
WARNING!
sudden engagement from causing tipping up and loss of control of the vehi-
cle, particularly on slopes.
5.4.3 Braking
First reduce the machine's speed by reducing the engine's r.p.m., and then press the
brake pedal ( 4.21 or 4.31) to slow down the machine until it stops.
Hydrostatic transmission
by just releasing the drive pedal.
5.4.4 Reverse
IMPORTANT
moving.
The pedal has to be released gradually, as a sudden
4.31).
4.32) in direction «F» and reach the required speed by pro-
Drive must be engaged as described (
Reverse must be engaged only when the machine has stopped
Push the pedal down as far as possible
4.21).
Disengage the parking brake and release the
The machine already slows down considerably
HOW TO USE THE MACHINE
4.22).
4.21).
4.32) ) to prevent