GGP ITALY 98SD Gebrauchsanweisung Seite 67

HOW TO USE THE MACHINE
IMPORTANT
and engine!
WARNING!
upper part of the cutting deck in order to keep maximum machine efficiency
and safety levels.
After each use, accurately clean the cutting deck to remove any grass remains or
debris.
WARNING!
the surrounding area when cleaning the cutting deck.
a) When washing the inside of the cutting
deck and the collector channel, the machine
must be on firm ground with:
– the stone-guard fitted;
– the operator seated;
– the cutting deck on position «1»;
– the engine running;
– the transmission in neutral;
– the blades engaged.
Connect a water hose to each of the pipe fittings (1) one at a time, and running water
through for a few minutes each, with the blades moving.
IMPORTANT
clutch:
– prevent the friction from coming into contact with oil;
– do not direct jets of high-pressure water directly onto the clutch unit;
– do not clean the clutch with petrol.
Take off the grass-catcher, empty and rinse it, and then put it in a position where it can
dry quickly.
b) To clean the upper part of
the cutting deck:
– lower the cutting deck com-
pletely (position «1»);
– blow a jet of compressed air
through the right and left guard
slots.
Never use hose-nozzles or harsh detergents for cleaning the body
Do not let debris and dry remains of grass accumulate in
Wear eye protection and keep people or animals away from
To avoid umpairing the efficient working of the electromagnetic
EN
1
25