Installation Options; Electrical Connection From Above On Unfinished Walls - STIEBEL ELTRON DHE Touch 18/21/24 Bedienung Und Installation

INSTALLATION
Installation options

13. Installation options

13.1 Electrical connection from above on unfinished
walls
1 Cable routing
f Reposition the mains terminal from the bottom to the top. To f
do this, undo the fixing screw. Turn the mains terminal with
connecting cables 180° clockwise. Route the cable around
the cable guide when doing so. Secure the mains terminal in
place.
f Replace the cable grommets by removing both cable f
grommets.
f Install the cable grommet downwards from above. f
90 |DHE Connect | DHE Touch
f Route the other cable grommet over the cable sheath of the f
power cable. Pull the cable grommets into the back panel,
until both locking tabs engage.
f Install the appliance on the threaded studs of the wall f
mounting bracket.
f Push the back panel firmly against the wall. Lock the fixing f
toggle by turning it 90° clockwise.
f Pull the cable grommets into the back panel, until both lock- f
ing tabs engage.
f Connect the power cable to the mains terminal. f
1
13.2 Electrical connection on unfinished walls with
short mains connection cable
www.stiebel-eltron.com