Pivoting Appliance Cover; Installation With Offset Tiles - STIEBEL ELTRON DHE Touch 18/21/24 Bedienung Und Installation

INSTALLATION
Installation options
f Reposition the threaded stud on the wall mounting bracket f
(the stud has a self-tapping thread).
f Rotate the wall mounting bracket 180° and mount it on the f
wall (the DHF logo is then turned towards the reader).

13.11 Installation with offset tiles

20
2
1
1 Minimum contact area of the appliance
2 Maximum tile offset
f Adjust the wall clearance. Lock the back panel in place using f
the fixing toggle (turn 90° clockwise).
www.stiebel-eltron.com

13.12 Pivoting appliance cover

The appliance cover can be turned round for undersink instal-
lation.
f Remove the programming unit from the appliance cover by f
pressing the locking hooks and removing the programming
unit.
f Turn the appliance cover (not the appliance) and refit the f
programming unit. Push the programming unit home in par-
allel until all locking tabs engage. When engaging the locking
tabs, apply counter-pressure by pushing against the appli-
ance cover from the inside.
DHE Connect | DHE Touch | 95