Commissioning; Initial Start-Up - STIEBEL ELTRON DHE Touch 18/21/24 Bedienung Und Installation

INSTALLATION

Commissioning

10.2 Installing the mini wireless remote control
You can attach the mini wireless remote control to the wall using
the wall mounting bracket.
f Secure the wall mounting bracket to the wall using the adhe- f
sive pad provided or a suitable countersunk screw (∅ 3 mm
or less).
11. Commissioning

11.1 Initial start-up

f Open and close all connected draw-off valves several times, f
until all air has been purged from the pipework and the
appliance.
f Carry out a tightness check. f
www.stiebel-eltron.com
≥ 60 s
f Activate the safety switch by firmly pressing the reset button f
(the appliance is delivered with the safety switch disabled).
In the DHE Connect 18/21/24 and DHE Touch 18/21/24 appliances,
the medium connected load (21 kW) is factory preset.
f Connect the programming unit connecting cable plug to the f
PCB.
DHE Connect | DHE Touch | 87