STIEBEL ELTRON DHE Touch 18/21/24 Bedienung Und Installation Seite 84

INSTALLATION
Installation
Fitting the wall mounting bracket
f Mark out the holes for drilling using the installation tem- f
plate. If the appliance is to be installed with water connec-
tions on finished walls, also mark out the fixing hole in the
lower section of the template.
f Drill the holes and secure the wall mounting bracket at 2 f
points using suitable fixing materials (screws and rawl plugs
are not part of the standard delivery).
f Fit the wall mounting bracket. f
Installing the twin connector
Material losses
!
Carry out all water connection and installation work in
accordance with regulations.
84 |DHE Connect | DHE Touch
f Seal and insert the twin connectors. f
Making the water connection
2
1
3
24
5 Nm
5 4
1 DHW with tee
2 Gasket
3 Cold water with 3-way ball shut-off valve
4 Strainer
5 Plastic profile washer
f Secure the tee and 3-way ball shut-off valve, each with a flat f
gasket, to the twin connector.
2
www.stiebel-eltron.com