Pressure Drop; Details On Energy Consumption - STIEBEL ELTRON DHE Touch 18/21/24 Bedienung Und Installation

INSTALLATION
Specification

17.5 Pressure drop

Taps/valves
Tap pressure drop at a flow rate of 10 l/min
Mono lever mixer tap, approx.
Thermostatic valve, approx.
Shower head, approx.

17.8 Details on energy consumption

The product data complies with EU regulations relating to the
Directive on the ecodesign of energy related products (ErP).
Manufacturer
Load profile
Energy efficiency class
Annual power consumption
Energy conversion efficiency
Default temperature setting
Sound power level
Special information on measuring effi-
ciency
www.stiebel-eltron.com
MPa 0.04 - 0.08
MPa 0.03 - 0.05
MPa 0.03 - 0.15
DHE Connect 18/21/24
234467
STIEBEL ELTRON
S
A
kWh 479
% 39
°C 60
dB(A) 15
Data at Pmax. Measured with flow limita-
Sizing the pipework
When calculating the size of the pipework, an appliance pressure
drop of 0.1 MPa is recommended.
17.6 Fault conditions
In the event of a fault, loads up to 80 °C at a pressure of 1.0 MPa
can occur briefly in the installation.
17.7 Test symbols
See type plate on the appliance.
DHE Connect 27 DHE Touch 18/21/24
234468
STIEBEL ELTRON STIEBEL ELTRON
S
A
473
39
60
15
tion to 9 l/min
DHE Connect | DHE Touch |
DHE Touch 27
234459
STIEBEL ELTRON
S
A
479
39
60
15
Data at Pmax. Measured with flow limita-
tion to 9 l/min
234460
S
A
473
39
60
15
105