Controlling The Core Temperature - Gastroback 42539 Bedienungsanleitung

9. For setting the grilling time: press the clock button on the control area. The def-
ault grilling time is flashing in the display area. While the grilling time is flashing,
touch the buttons "+" and "–" to set the desired value.
10. For changing the currently displayed grilling time: press the clock button on
the control area. The current grilling time is flashing on the display area. While
the grilling time is flashing, touch the buttons "+" and "–" to set the desired value.

CONTROLLING THE CORE TEMPERATURE

CAUTION:
When the temperature probe is not in use, place it beside the appliance.
When the temperature probe is connected to the appliance (see: 'Preparations'),
you can monitor the core temperature of your food automatically during cooking,
by activating the temperature control (see: 'Temperature Probe'). As soon as the set
core temperature is reached, a signal sounds.
Tip: The set core temperature can be given in *F as well. Press the unit button "°C
/ °F" for changing the temperature unit (see: 'Knowing Your New Contact Grill').
1. Ensure that the plug of the temperature probe is inserted in the probe connector
(see: 'Preparations').
2. On the upper left side of the display area, touch the probe button. This will
activate the temperature control function and "PROBE TEMP' illuminates. On
the upper right side of the display area, the set core temperature is flashing for
some 5 seconds and then illuminated continuously (see: 'Temperature Probe').
Note
With "Er3" flashing on the display area, the temperature probe is not connected
correctly or out of order. Ensure that the probe plug is inserted correctly in the pro-
be connector. Turn the probe plug a little to and fro to ensure good contact. The
error message "Er3" disappears immediately, if the temperature probe is in cor-
rect working order. If the error message persists, the temperature probe may be
damaged or the probe plug may be polluted. In this case, the appliance will not
work, while the temperature probe function is activated. Touch the probe button
for operating the appliance without temperature control.
3. As long as the set core temperature flashes on the display area (immediately
after activating the temperature control), you can adjust the desired temperature
via the "+" and "–" buttons on the control area. In general, the following values
are possible: 45, 50, 55, 60, 65, 75°C (see: 'Temperature Probe').
Do not place the temperature probe on the grilling surfaces.
75