Adjustment Of The Running Belt - AsViva T18 Benutzerhandbuch

ADJUSTMENT OF THE RUNNING BELT

1. Use the 6mm inner hexagonal wrench for the screw on the left side of the running belt and rotate it
clockwise in 1/4 steps.
2. Repeat this step for the opposite side.
and the running belt, since it increases the pressure of the front and rear rollers.
Adjust the running belt in the middle:
1. Start the treadmill with no loading with the speed of 6km/h and let it run.
2. If the belt is turnin to the left side, screw the screw in 1/4 steps clockwise. If it turns to the right side,
screw the screw counterclockwise in 1/4 steps.
3. Repeat this process until the belt is running in the middle.
3. Please note. The running belt can't be adjusted to tightly. It can cause a damage off the treadmill
74