Over-Current Protector; Operation And Adjustment - AsViva T16 Betriebsanleitung

OPERATION AND ADJUSTMENT

Plug your fitness equipment into the main power and turn on the switch (1).
You will hear a beep and the computer screen will light up.
Press the "START"-Button, the treadmill will start with the minimum speed.
Press the speed keys for setting the speed.
To safetly stop with the workout, press the "STOP" button. After the treadmill has stopped,
you can switch it off from the power supply.
Please note, the computer will only start if the safety key is on its place. If the key is removed
from its place, the treadmill won't start or will turn off. Attach the end of the safety key rope on
your body.

OVER-CURRENT PROTECTOR:

There is an over-current protector (2) located on the right side of the switch (1) (see above
picture); in case of short circuit or over-current, the Button of the over current protector will
pop up and the treadmill will power off; please unplug the power source and push down the
button. Plug the machine back in and then turn on the switch to restart your treadmill.
46