Receipt Of The Unit; Delivery/Reservations; Storage Precautions; Packaging - Carrier 39CQ Anleitung

For your safety, we recommend the use of PPE (Personal Protective Equipment)

1 - RECEIPT OF THE UNIT

The installation and maintenance operations must be performed by qualified and experienced personnel.
Follow the operating precautions to the letter when working on the unit. Labels have been placed on the unit to remind
you of the safety instructions.
As a general rule, follow all applicable safety regulations and standards.
Damage to the air handling unit will be disregarded in the event of failure to follow the instructions in this document.
Each air conditioner has a name plate bearing an identification number. This number must be quoted in all correspondence.

1.1 Delivery/Reservations

In accordance with Article 133-3 of the French Code of Commerce, the recipient is entirely responsible for checking the condition
of the goods received. In the event of missing items, the customer must provide the exact number of parcels delivered. Any
damaged or missing items must be specified on the delivery note in the presence of the driver before signing the delivery note.
These comments must be confirmed to the carrier by registered letter within two business days, and a copy of this letter must be
sent to the manufacturer. The comments "conditional" and "pending unwrapping" shall have no value. The client must unwrap
the goods in the presence of the driver. Claims must be made at the time of delivery and be described in detail.

1.2 Storage precautions

If the unit is not to be installed immediately, it must be protected from the elements; storage in the packaging is recommended.

1.3 Packaging

The unit is packed on a pallet covered by shrink wrap film. Any additional casings may be packed on the same pallet, under the
same film.

1.4 Handling

The entire pallet and contents must be handled with care using a forklift truck or manual stacker.

2 - SAFETY INSTRUCTIONS

2.1 General safety instructions

The following must be performed before any work on the air handling unit:
- The power must be switched off (proximity switch)
- Electrical equipment must be switched off (electric heater with fan delay, humidifier, etc.)
- The fan must be stopped (WARNING: it may take several minutes to stop completely)
- Work must be carried out by an accredited technician.

2.2 Field of application

The air handling unit is only designed for AIR HANDLING applications.
Outdoor AHU: -20°C / + 40°C (excluding water)
Indoor AHU: -25°C / + 60°C MAX
Cold fluids: fluid inlet temperature > 5°C
Hot fluids: the specifications are given on the manufacturer's name plate (temperature and pressure).
Comply with the type of fluid given on the name plate
EN - 2