Electric Heater - Carrier 39CQ Anleitung

Par Description
Switch to safety mode preceding that of Pr 55
56
Switch to safety mode preceding that of Pr 56
57
Switch to safety mode preceding that of Pr 57
58
PLC ladder programme validation
59
 FMA with EC motor:
As standard, EC motors are supplied with connectors which allow them to be connected to the terminal box with no intervention.
Two cables (power and control) are provided to facilitate connection to the connectors.
M
1 2 3 4
Power cable
4
3
2
1

4.6.2 Electric heater

Without box:
Connection to the coil terminals (accessible from the side).
With regard to the heaters:
Barettes de
connexion
Connection strips
étage 1
stage 1
étage 4
stage 4
Factory setting
Eur
Level 3 parameters
2 3 5 6
Live L1
Live L2
Live L3
Earth
Option A
Option A
étage 3
stage 3
étage 5
stage 3
Setting 1:
Speed from
potentiometer
0
0
0
0
Potential free, normally closed state signalling contact
6
Potential free state signalling contact, changeover switch, shared connection (2A, max
5
250 VCA, min.10mA, AC1)
3 0-10 VDC actual value/control input, impedance 100kOhm; only use as an alternative
to the 4-20mA input, SELV
2 Reference earth for control interface, SELV
With regard to the terminal:
3 x 400 V - 50 Hz
Option A
Option A
4
étage 3 5
stage 3
6
1
étage 4
2
stage 4
3
Nylon 960 strips
Barettes nylon 960
EN - 9
Setting 2: Setting 3:
Speed from Speed on the
contact
0
0
0
0
Control cable
thermostat à réarmement
automatic-reset thermostat
(80°C) automatique (80°C)
étiquette terre /tension
Earth/voltage label
thermostat à réarmement
manual-reset thermostat
manuel (115°C)
(115°C)
4
étage 1
5
stage 1
6
1
étage 2
2 stage 2
3
keypad
EN