Installation And Connections Installation; Selecting A Location; Mounting - Carrier 39CQ Anleitung

4 – INSTALLATION AND CONNECTIONS INSTALLATION
The installation of the equipment must comply with the regulations and standards of the recipient country.

4.1 Selecting a location

Depending on the type of unit being controlled, it can either be ceiling- or floor-mounted or installed vertically.
Ensure a minimum space is left to allow the doors to open (540mm, 595mm, 735mm depending on the configuration). However,
if this access cannot be provided, all of the doors can be removed from their hinges to gain access.
Details of hinges/handles: Allen key lock, size 4
When they are unlocked, the handles are in "hinge" mode. It is possible to unlock a single row of handles to open like a
conventional door. If all of the handles are unlocked, the door can be removed

4.2 Mounting

For ceiling-mounted units, two solutions are possible depending on your lifting equipment:
- Secure the main casing to the ceiling, then assemble the additional casings and secure these to the ceiling.
- Assemble the main casing and the additional casings on the floor, then raise the assembly and secure it to the ceiling.
Horizontal ceiling-mounted
Horizontal floor-mounted
Handle locked
Handle unlocked
EN - 4
Vertical
Door