Hydraulic Oil; Technical Data - ATIKA ASP 8-1050 Bedienungsanleitung

5. Release the hose clamp on the oil hose, so that the oil can
run out.
16
6. Reconnect the oil hose.
7. Pour in the new hydraulic oil (6.0 litres) using a clean
funnel.
8. Screw the venting cap on again.
9. Fasten the casing.
Model
Type
Splitting force
Log length
Log diameter
Stroke
Feed speed
Return speed
Hydraulic oil (max.)
Hydraulic pressure
Electric motor performance (power consumption)
Power supply
Dimensions
Weight
Dispose of the old oil properly (local oil disposal point).
The old oil must not be poured into the ground or drain-
age system, or mixed with other waste.

Hydraulic oil

We recommend the following hydraulic oils for the hydraulic
cylinder:
Aral Vitam GF 22
BP Energol HLP-HM 22
Mobil DTE 11
Shell Tellus 22
or equivalent
Do not use any other types of oil. The use of any other
type of oil will adversely affect the operation of the hy-
draulic cylinder.
T e c h n i c a l d a t a
T e c h n i c a l d a t a
24
80 N (8 t) ± 10 %
min. 120 – max. 320 mm
21 MPa (210 bar)
P = 3700 W S6 – 40%
1
Threephase 400 V 3~ 50 Hz, 10 A inert
Length 930 x Width 830 x Height 1470 mm
ASP 81050
LS6T
1025 mm
480 mm
ca. 0,06 m/sec.
ca. 0,05 m/sec.
6,0 litres
ca. 125 kg