Herunterladen Inhalt Inhalt Diese Seite drucken

Finishing Work; Care And Maintenance - ATIKA ASP 8-1050 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
7
8
12
Adjusting the splitting cross::
1.
Loosen fixing screw.
2.
Push splitting blade (11) in required position.
3.
Mount fixing screw.
9
Splitting short wood:
1. upper position of table
1. Place the log on the splitting table . Fig. 2 (page 21)
Only split the logs in the direction of the wood fibres.
2. Hold the log tight with the clamping claws.
1. lower position of table
2. Remove the splitting cross.
3. Place the log on the splitting table .
when cleaving logs: The log
to be cleaved is not cleaved
right through, jams on the
cleaving blade and is pulled
up during the blade's return
movement. It is no longer
possible to release the log
manually.
In this case, proceed as
follows:
the pressure for several seconds. This can lead to damage to
the machine.
Position the log on the table again and repeat the splitting
phase, or put the log on one side.
How to release a jammed log?
There is a risk of knotted logs getting stuck during the splitting
process.
Fixing screw
11
hands.
22
Splitting long wood:
Possible malfunction
1. Switch off the device.
2. Fasten the table in the
top position.
3. Switch on the device and continue the splitting opera-
tion.
Never try to split two logs at once.
Never try to remove or replace the log during the splitting
process.
Never try to force the splitting of the log by maintaining
1. Switch machine off and disconnect the power.
2. Carefully move the stuck log backwards and forwards to
loosen it.
Never hammer on the stuck log.
Never use a saw to cut the stuck log out of the machine.
Do not enlist the aid of a second person - this is a one-
man job.

Finishing work:

Bring the splitting blade to the lower position (run-in state).
Release one of the operating levers.
Switch the machine off and disconnect the power.
Follow the care and maintenance instructions.
C
a
r
e
a
n
d
C
a
r
e
a
n
d
Remove the plug from the power socket before
starting any maintenance or cleaning work.
Wear protective gloves in order to avoid injury to the
10
m
a
i
n
t
e
n
a
n
c
e
m
a
i
n
t
e
n
a
n
c
e

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis