Hydraulic Oil - ATIKA ASP 4 Bedienungsanleitung Sicherheitshinweise Ersatzteile

7. Check the oil seal and replace it if it is damaged in any
way.
Oil seal
8. Replace the dipstick and screw it firmly into place.
Caution! Do not tighten the screw too tightly, since this
may damage the oil seal or the thread in the cylinder
cover.
Fig. 10
Fig. 11
When should I change the oil?
The first oil change should be carried out after 50
operating hours, and then every 250 operating hours or
1x per year.
Changing the oil:
1. The log ram must be in its starting position.
2. Place a container under the log splitter to catch the old oil.
The container should have a capacity of at least 4 litres.
3. Unscrew the dipstick. Do not drop or lose the oil seal
when removing the dipstick.
Downloaded from www.Manualslib.com
Dipstick
manuals search engine
4. Now tip the machine to empty the oil into the container.
5. Stand the log splitter on end, with the filler opening at the
top. Fig 10.
A second person will be required to up-end and
hold the log splitter.
6. Pour in the new hydraulic oil (2.6 litres) using a clean
funnel.
7. Clean the dipstick and the oil seal.
8. Check the oil seal and replace it if it is damaged in any
way.
9. Replace the dipstick and screw it firmly into place.
Caution! Do not tighten the screw too tightly, since this
may damage the oil seal or the thread in the cylinder
cover.
Dispose of the old oil properly (local oil disposal
point). The old oil must not be poured into the
ground or drainage system, or mixed with other
waste.

Hydraulic oil

We recommend the following hydraulic oils for the hydraulic
cylinder:
Shell Tellus T 22
Aral Vitam Gf 22
BP Energol HLP 22
Mobil DTE 11
or equivalent
Do not use any other types of oil. The use of any other
type of oil will adversely affect the operation of the
hydraulic cylinder.
G G u u
• The machine is guaranteed for a period of 2 years from
the date of purchase/delivery against faults due to material
or manufacturing errors.
• The guarantee is rendered invalid in the event of any
damage caused due to improper use or handling,
improper packaging when returning the machine or failure
to observe the operating instructions.
• Faulty parts must be returned to our works carriage-paid.
The decision on free replacement of faulty parts will be
made at our discretion.
• The guarantee does not cover normal wear and tear to the
splitting wedge, hydraulic oil, guide plates, seals or
wheels.
• Any guarantee work will be carried out by the
manufacturer. Our express approval must be obtained
before having any such work carried out by another
company.
• The guarantee only remains valid provided that original
replacement parts are used.
• We reserve the right to make technical changes in the
course of technical progress.
14
a a r r a a n n t t e e e e