Hydraulic Oil - ATIKA ASP 6 N Bedienungsanleitung

3. Place a container under the log splitter to catch the old
oil. The container should have a capacity of at least
4.5 litres.
4. Screw off the drain plug to allow the oil to flow out.
5. Insert the seal and drain plug again.
6. Pour in the new hydraulic oil (approx. 4.0 litres) using a
clean funnel.
7. Clean the dipstick and the oil seal.
8. Check the oil seal and replace it if it is damaged in any
way.
9. Replace the dipstick.
Dispose of the old oil properly (local oil disposal point).
The old oil must not be poured into the ground or
drainage system, or mixed with other waste.

Hydraulic oil

We recommend the following hydraulic oils for the hydraulic
cylinder:
Shell Tellus T 22
Aral Vitam Gf 22
BP Energol HLP 22
Mobil DTE 11
or equivalent
Do not use any other types of oil. The use of any other
type of oil will adversely affect the operation of the
hydraulic cylinder.
All manuals and user guides at all-guides.com
drain plug
G u a r a n t e e
G u a r a n t e e
Please observe the enclosed terms of guarantee.
23