Adjustment Of Brakes; Adjustment Of Clutch Lever; Rear Brake - Beta Motorcycles RR 50 CC ENDURO Bedienungsanleitung

3
A
A
1
C
B
EN
2
A
36

ADJUSTMENT OF BRAKES

FRONT BRAKE
The front brake is disk type with hydraulic
control.
You can adjust lever height by means of
the register A.

REAR BRAKE

You may adjust pedal height by means of
register A.
To do this, loosen nut 1 and turn lever 2
to adjust as required.
After it has been adjusted, tighten nut 1.
WARNING: reduced play causes
brake overheating leading to sudden
lockup.
ADJUSTMENT OF CLUTCH
LEVER
Generally, the only operation that is per-
formed on the clutch is adjustment of the
position of lever A.
To perform the adjustment, lift rubber dust
cover C and turn adjuster B.
The lever must have 5 mm of idle stroke.