Troubleshooting - Scheppach Therbio Originalbetriebsanleitung

Troubleshooting

Problem
Significant pressure
fluctuatio
Machine does not work
No pressure
22 І GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Possible cause
Nozzle blocked
Battery faulty or not charged
On-/off-switch (14) is off
Damaged mains cable
Faulty voltage supply
No water in the tank
Battery faulty or not charged
Nozzle blocked
Solution
Rinse the nozzle (10) with water. If required, clean
the nozzle with a needle
Change the battery or charge it
Check the on-/off-switch.
Turn the machine off and disconnect it from the
mains. Check the mains connection cable for dam-
age. If required, have the mains connection cable
replaced by an authorised specialist.
Check the electrical equipment for compliance with
the information on the rating plate.
Refill with water
Change the battery or charge it
Rinse the nozzle (10) with water. If required, clean
the nozzle with a needle