Scope Of Delivery; Intended Use - Scheppach Therbio Originalbetriebsanleitung

Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
Recommendations:
Read the entire text of the operating instructions
prior to the assembly and operation of the device.
These operating instructions are intended to make
it easier for you to get familiar with your device and
utilize its intended possibilities of use. The operating
instructions contain important notes on how to work
safely, properly and economically with your machine
and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life
of the machine.
In addition to the safety regulations contained here-
in, you must in any case comply with the applicable
regulations of your country with respect to the opera-
tion of the machine. Put the operating instructions in
a clear plastic folder to protect them from dirt and hu-
midity, and store them near the machine. The instruc-
tions must be read and carefully observed by each
operator prior to starting the work. Only persons who
have been trained in the use of the machine and have
been informed on the related dangers and risks are
allowed to use the machine. The required minimum
age must be met. In addition to the safety notes con-
tained in the present operating instructions and the
special regulations of your country, the generally rec-
ognized technical rules for the operation of machines
must be observed.
16 І GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Device description (Fig. 1-9)
1. Weed killer
2. Transport wheels
3. Mains plug
4. Sealing cap
5. Compression fitting
6. Handle
7. Actuation lever
8. Locking button
9. Lance
10. Nozzle
11. Extension cable (not supplied)
12. Operating panel
13. Lance holder
14. ON/OFF button
15. Operation LED
16. Water shortage warning LED
17. Temperature indicator
18. Charge status indicator
19. Pump button
20. Pump operation LED
21. Heating button
22. Heating mode LED
23. Battery
24. Battery cover
25. Hose

Scope of delivery

• Open the packaging and take out the equipment
with care.
• Remove the packaging material and any packaging
and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for trans-
port damage.
• If possible, please keep the packaging until the
end of the guarantee period.
m IMPORTANT!
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of swal-
lowing or suffocating!
• Original Operating Manual
• Weed killer (1)
• 2 x compression fitting (5)
• Handle (6)

Intended use

The weed killer is used for weed and moss control
in joints and for use in vegetable and kitchen gar-
dens. The hot water destroys the cellular structure
of weeds all the way into the root, which causes it to
die. Furthermore, the machine can be used for water-
ing plants with cold water, for spreading fungicides,
pesticides, herbicides, fertilisers or detergents which
are soluble in cold or warm water, as well as for dis-
infecting and cleaning dirt and stains using hot water.