Noise Data - Ammann ARW 65 1B40 Originalbetriebsanleitung

6. Vibration
Centrifugal force
Vibrating frequency
Vibration force per cm of roller width
Amplitude
7. Filling quantities
Water
Fuel
8. Noise and vibration data
The following noise and vibration data according to EC Machinery Directive in the version (2006/42/EC), was determined, taking into account the
following standards and directives. In operational use, values can deviate depending on the prevailing conditions.
1)

8.1 Noise data

The noise data specified in Appendix 1, sub-clause 1.7.4.u of the EC Machinery Directive is for:
Sound pressure level at the workplace L
Measured sound power level L
Guaranteed sound power level L
The noise values were determined, taking into account the following directives and standards:
Directive 2000/14/EC / EN ISO 3744 / EN 500-4
8.2 Vibration data
Hand/arm vibration values according to Appendix 1, sub-clause 3.6.3.1 of the EC Machinery Directive:
Total vibration value of the acceleration a
Uncertainty K
The acceleration value was determined, taking into account the following directives and standards:
EN 500-4 / DIN EN ISO 5349
1)
As the permissible rating sound level of 85 dB (A) can be exceeded by this machine, operators must wear hearing protectors.
PA
WA,m
WA,g
hv
Low amplitude
13 kN
60 Hz
100 N/cm
0.3 mm
60 l
5 l
92 dB
106 dB
108 dB
3.9 m/s
1.0 m/s
32
2. Technical Data
High amplitude
18 kN
138 N/cm
0.5 mm
2
2