Special Equipment; Noise And Vibration Data - Ammann AVH 7010 Betriebsanleitung

6. Superficial power
Base unit
w. mount. brackets 75 / 150 mm

7. Special equipment

Vulkollan plate
Mounting brackets 75 mm
Mounting brackets 150 mm
Protecting cover
Electrical starter

8. Noise and vibration data

The following listed noise and vibration data according to the EC machine directive in the version (91/368/EEC) was determined at
the rated speed of the drive motor with vibration with the machine placed on a resilient base.
Values can deviate in normal use depending on the conditions prevailing at the place of use.
8.1 Noise data*
The noise emission specified in appendix 1, subclause 1.7.4.f of the EC machine directive for:
the sound pressure level at the operator
place is L
PA
Measured sound power level L
Guaranted sound power level L
The noise levels were measured according to ISO 3744 for the sound power level (L
(L ) at the operator workplace.
PA
8.2 Vibration data
Hand-arm vibration values according to appendix 1, sub-clause 3.6.3.a of the EC machine directive:
The weighted effective
acceleration, determined according to
ISO 8662, part 1, is
*Since the permissible noise rating level of 89 dB can be exceeded with this machine, the operator must wear
suitable hearing protection.
WA,m
WA,g
value of
1090 m²/h
1350 / 1600 m²/h
X
X
X
X
X
93.0 dB
107 dB
109 dB
) and ISO 6081 for the sound pressure level
WA
3,5 m/s²
25
2. Technical data