Transport; Loading And Transportation - Ammann ARW 65 1B40 Originalbetriebsanleitung

4.1 Loading and transportation

Only use sufficiently strong and secure loading
ramps when loading.
Check the contact points (frame, lifting rings) be-
Danger
fore use for damage and wear. Immediately repla-
ce damaged parts.
Secure the machine against rolling or slipping off
and against tipping over.
Ensure that no persons will be endangered.
When loading, lashing down and lifting the machi-
ne always use the provided lifting points.
Persons are in danger, if they
• go near swinging loads or
• stand under swinging loads
Lock the tow bar to loading and transport.
2
1
B6599016.cdr
After being loaded on to the means of transportation, the machi-
ne should be lashed in place. The lashings should be attached to
the front or rear rings in the arms (1).
Use the centre-of-gravity suspension point (2) on the hoop guard
in order to lift the machine.
1 720 kg
38

4. Transport