Connection Check - Endress+Hauser iTEMP HART TMT162 Bedienungsanleitung

TMT162 HART
3.6

Connection check

After the electrical installation of the device, always perform the following final checks:
Device condition and specification
Are the device or the cables free of damage (visual check)?
Electrical connection
Is the cable/conduit installation correctly separated, with no loops or
crossovers?
Are the cables' load relieved?
Have the cables been correctly connected? Compare with the
connection schematic on the terminals or see Fig. 4.
Are all terminal screws tightened?
Is the cable or conduit entry sealed?
Is the housing cover screwed tight?
Endress+Hauser
Wiring
Hint
-
Hint
-
-
See connection schematic
on the housing
Visual check
27