Programmable Buttons - Olympus DS-5500 Bedienungsanleitung

5 Press the + or – button again to
select [Start] option.
Format
SD Card
Are You Sure?
Start
Cancel
BACK
6 Press the OK/MENU button again
to initiate the formatting process.
• [Format Done] displays when
formatting ends.
Notes:
• The time required to format the
memory varies according to the
capacity of the memory to be
formatted.
Do not interrupt the formatting
process with the following actions.
Doing so may damage the data or
the card.
− Remove the battery.
− Remove the card.
• Formatting the memory will erase
all the stored data including locked
files.
• When an unformatted card is
inserted, the format menu will be
displayed automatically.
• Locked SD cards cannot be
initialized.
• Memory cards will be formatted
using quick format. Formatting
the card will reset the information
in file management, but the data
inside the card may not be deleted
completely. Be careful of data
leakage when disposing or handing
of the card. We recommend that
you physically destroy the card
when disposing of it.
Customizing the recorder
You can customize various settings
of the recorder using the ODMS
software (Windows) and DSS Player
software (Macintosh).
For more details, refer to the online
help for ODMS software and DSS
Player software.
Common Settings:
You can set the default values for
each of the recorder's Menu items.
Administrative Settings:
❏ General
Accessibility:
• You can customize / adjust / set /
configure various settings related
to user authorization, such as
16
prohibiting both file erasure and
Menu settings.
Splash Message:
• You can set the contents that appear
in the message which is displayed
during start-up.
Slide Switch Guide:
EXIT
• You can set the Slide Switch Guide,
which indicates the position of the
Slide Switch on the display, to either
enabled or disabled.
Alarm:
• You can specify events for which the
alarm sound will be output.
❏ Display
Information Area:
• You can select the information which
is displayed on the upper part of LCD
in the New Stop, Recording, Playback,
CUE/REV, FF/REW or Erase mode:
Author ID, File Name, or Work Type.
• You can select the information which
is displayed on the lower part of LCD
in the Recording mode: Level Meter,
Author ID, File Name, Work Type,
Recording Time
LED Color:
• You can select the color of LED
during recording and playback: Off,
Red, Green, Blue, Orange, Yellow.
❏ Device Security
You can customize / adjust / set /
configure various settings related to
the recorder's device lock function.
PIN Code:
• Password setting.
Device Lock:
• Device lock function On/Off.
• Settings related to the timing for
setting the device lock.
• Changing the number of allowable
input errors (mismatches) for the
password.
❏ Author List
You can customize / adjust / set /
configure settings related to the
Author.
Author List:
• Register multiple Author IDs (up to
10 items).
• Set the priority level for each Author
ID.
• Select the Author ID you want to be
used by default.
Author Selection:
• Choose to activate/deactivate the
Author ID selection at the recorder
start-up.
❏ Work Type List
You can customize / adjust / set /
configure settings related to the
Work Type.
Work Type List:
• Register Work Types (up to 20 items).
• Set the option items for each Work
Type (up to 10 options).
• Select the Work Type you want to be
used by default.
Worktype Selection:
• Choose to activate/deactivate the
Work Type selection when the
recorder is iv New mode.
❏ Device Folders
You can customize / adjust / set /
configure various settings related to
the recorder's folders.
Enabled:
• Change the number of usable
folders.
Folder name:
• Change the folder name.
Worktype:
• Set the folder's work type.
AutoLock:
• Set the Auto Lock on a file to On/Off.
Encryption:
• Select a folder's Encryption level.
It is possible to set the Encryption
level to [High] (256 bit), [Standard]
(128 bit) or [No] (deactivates the
function).
Password:
• Set the folder's Encryption Password.
❏ Recording
You can customize / adjust / set /
configure various settings related to
the recording and recorded files.
DSS Format:
• Select the recording format (DSS Pro/
DSS Classic).
Record function:
• Select the recording mode
(Overwrite/Append/Insert).
File download:
• Select the files you want to be
transferred to the PC (All files/
Finished files).
❏ Programmable Buttons
You can change the allocated
functions for the Programmable
Smart Buttons (F1, F2, F3 buttons),
the NEW button, and the Slide
Switch.