Herunterladen Inhalt Inhalt Diese Seite drucken

Cembre HTEP-S Bedienungsanleitung Seite 3

Vorschau ausblenden Andere Handbücher für HTEP-S:
Inhaltsverzeichnis

Werbung

17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
Serial number
Numéro de série
01
Seriennummer
Número de serie
Numero di matricola
18
19
20
21
22
200
25
26
27
28
29
30
31
50
32
51
49
33
52
48
34
53
47
35
54
46
55
45
56
44
36
57
43
37
58
42
38
59
41
39
40
FIG. 12
LONGITUDINAL SECTION
COUPE LONGITUDINALE
SCHNITTZEICHNUNG
SECCION LONGITUDINAL
SEZIONE LONGITUDINALE
25
23
24
1. GENERAL CHARACTERISTICS
– Application range: suitable for installing AR... electrical contact bush for railway
– Rated operating pressure: ...........................................................600 bar (8,700 psi)
– Dimensions: length .......................................................................845 mm (34.5 in.)
*
Weight: ........................................................................................3,0 kg
*
Oil recommended: ....................... AGIP ARNICA 32
– Safety: the tool is provided with max pressure valve; MPC1 special manometer, is
available upon request to check the correct setting of the valve.
2. INSTRUCTIONS FOR USE
2.1)
Drill rail web or, if already drilled, use a suitable reamer to clean the hole (Fig. 1).
2.2)
Check the size of the hole with the "GO/NO GO" gauge CAL ....; the hole size is
correct only if the green part enters the hole. If the red part enters, the hole is
too large (Fig. 2).
2.3)
Insert the AR...-1 copper bush into the rail hole (Fig. 3).
2.4)
Insert the calibrated plunger OG... into the bush, on the flanged side (Fig. 4).
Ensure that the ram, in the tool head is fully retracted. Using the recess in the
gauge CAL.... screw and tighten the plunger OG... into the tool head (Fig. 5).
In order to avoid breakage problems, always fully screw the plunger in the
threaded seat of the head.
2.5)
Operate the moveable handle to pull the plunger OG... through the bush and extru-
de the bush onto the side of the hole (Fig. 6).
2.6)
The bush will also extrude itself around the opposite side of the rail web (Fig. 7).
2
HYDRAULIC TOOLS
HTEP-S ; HTEPF-S ; HTEPN-S
industry applications.
width .........................................................................130 mm (5.1 in.)
∅ head .....................................................................48 mm (1.9 in.)
SHELL TELLUS OIL TX 32
(Ref. to Figs. 1 ÷ 7)
ENGLISH
(6.6 lbs)
or
or equivalent

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Htepn-sHtepf-s

Inhaltsverzeichnis