Introduction; Intended Use; Equipment - Parkside PDMFG 180 A1 Originalbetriebsanleitung

3-IN-1 PNEUMATIC
MULTI-FUNCTION TOOL
PDMFG 180 A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

Drill attachment:
The drill attachment is suitable for drilling into plas-
tics, wood, metal and similar materials.
Ratchet attachment:
The ratchet attachment is suitable for fastening and
loosening screw connections in the automotive (tyre
fitting, etc.) and agricultural fields. Note the neces-
sary torques when tightening screws and nuts.
Precision drill grinder attachment:
The precision drill grinder attachment is suitable for
fine grinding work with pencil grinders, work with
shaped polishers, work with felt polishers and work
with lamellar grinding wheels.
The tool may only be operated with a compressed
air supply. The maximum permissible operating
pressure specified on the tool must not be exceeded.
This tool must not be operated with explosive,
flammable or health-damaging gases.
Do not use as a lever, crusher or striking tool.
Any other usage or modification of the tool is
deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no re-
sponsibility for damage(s) resulting from improper
usage. This tool is intended for domestic use only.
│ GB │ IE │ NI
■ 2
Symbols on the compressed air tool:
WARNING!

Equipment

Compressed air tool
Trigger
Trigger lock
Air inlet
Tool shaft
Compressed air drill
Drill attachment shaft
Wheel-rim chuck
Ratchet attachment shaft
Compressed air ratchet
Square retainer
Turn bolt
Collet chuck nut
Spindle
Shaft of the precision drill grinder attachment
Collet chuck
Assembly tool (SW 14)
Assembly tool (SW 19)
Oil bottle
Wrench
Connector nipple
Teflon tape
Read the operating
instructions before use.
Always wear eye
protection when
using or maintaining
the compressed air
polisher.
Always wear a dust
mask in situations in
which dust is being
generated.
Always wear hearing
protection.
Oil daily
PDMFG 180 A1