Setting The Shock Absorbers - Reely ROAD Carbon Fighter Bedienungsanleitung

b) Setting the Shock Absorbers
The shock absorbers at the front (A) and rear (B) vehicle axles
can be mounted in different positions at the damper bridge.
Always set the shock absorbers for one axle evenly (at the left
A
and right wheels of the front or rear axle). Otherwise, driving
behaviour will be influenced negatively.
If the setting is too stiff, the vehicle will jump even on a small
unevenness, and the wheels will lose touch with the ground.
This will cause a lower acceleration. When the setting is too
soft, the vehicle will rebound too strongly, and the chassis will
touch the ground.
B
37