Terminal Temporary Disable Or Enable; Writing Text; Selecting Text Entry Modes; Selecting Text Entry Methods And Languages - Motorola MTP3250 Funktionsbenutzerhandbuch

68015000899–FC (en-US)
Chapter 5: Features
radio only when you do not expect to recover it. If it is recovered then a Permanent Disable radio can
be reactivated by returning it to Motorola Solutions.
5.19

Terminal Temporary Disable or Enable

Your radio is provided with a feature that allows your service provider to disable it temporarily in case it
is stolen. When your radio is disabled or is powered up in disabled state, it looks and acts like it is
turned off.
If your radio is found, your service provider can enable it again over the air. After your radio is enabled,
you may resume normal operation.
5.20

Writing Text

Every time that you see text entry screen, refer to this section.
5.20.1

Selecting Text Entry Modes

Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press Menu → Entry Mode.
2 Select one of the following:
• Primary – for entering alphanumeric characters.
• Numeric – for entering numbers only.
• Symbol – for entering symbols only.
• Secondary – for entering alphanumeric characters (this mode is optional and you have to
add it to the list). It is convenient when you use one language, and sometimes wish to switch
to another one.
NOTICE: In the text entry screen, you can also press # key repeatedly to toggle through
the entry modes.
5.20.2

Selecting Text Entry Methods and Languages

Prerequisites: Your radio displays the text entry screen.
Procedure:
1 Press Menu → Entry Setup.
2 Select one of the following:
• TAP – Enter letters, numbers, and symbols by pressing an alphanumeric key one or more
times.
• iTAP – Let the radio predict each word as you press an alphanumeric key.
NOTICE: You can use these methods in the languages programmed in the radio.
134 Send Feedback