Location; Enabling Gnss; Viewing Your Position; Viewing Testpage - Motorola MTP3250 Funktionsbenutzerhandbuch

2 Select Networks → TG Net Sel → Any TG Net.
Your radio selects and registers to the network automatically from the predefined list.
4.16

Location

NOTICE: This feature is a paid feature.
This sub-menu allows you to enable the GNSS, change GNSS accuracy, and view your position and
testpage.
See Global Navigation Satellite System (GNSS) Location Service on page
4.16.1

Enabling GNSS

Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Interface.
3 Select On.
NOTICE: Your service provider can enable this feature.
4.16.2

Viewing Your Position

Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Position.
3 Scroll to view the results about the last time your location was calculated.
NOTICE: To refresh your position:
• Select Position – the radio refreshes its position automatically
• Press Refresh
4.16.3

Viewing Testpage

Procedure:
1 From the home screen, press the Menu key.
2 Select Location → Testpage.
3 Select one of the following:
• Position – displays detailed information on radio's current position: time, N (latitude), E
(longitude), H (height), Sats Used (a number of tracked satellites), B (bearing), HS
(horizontal speed), LC (level of confidence).
• Power – displays detailed information on a particular satellite: PRN code, Status, Mode, C/N
(carrier-to-noise ratio).
Send Feedback
68015000899–FC (en-US)
Chapter 4: Main Menu
126.
115