Set Volume; Setting Volume; Language; Setting Language - Motorola MTP3250 Funktionsbenutzerhandbuch

NOTICE: New ring style is played immediately for a few seconds. If necessary, adjust the
volume level.
4.8.2

Set Volume

This menu item allows you to adjust the Speaker and Earpiece tone volumes.
4.8.2.1

Setting Volume

Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Set Volume.
3 Select Speaker or Earpiece.
4 Select one of the following:
• Voice Vol – sets the volume level for voice.
• Duplex Vol – sets the volume level for duplex ringtones.
• Simplex Vol – sets the volume level for simplex ringtones.
• Keypad Vol – sets the volume level for keypad tones.
• Tones Vol – sets the volume level for alert tones.
• Call-Out Vol – sets the volume level for Call-Out tones (if enabled).
NOTICE: If the display shows only one option Volume, you can adjust all of the above
settings at once. You have the option to change the settings individually when the
Volume Adj. Mode is set to Individual.
5 Press Right or Left Navigation key to change the value.
NOTICE: When the battery level is low it is not recommended to attach the 4 Ohm
speaker to the radio as it can cause reset or shutdown of the radio.
4.8.3

Language

This sub-menu allows you to change the language of the radio.
4.8.3.1

Setting Language

Prerequisites: The list of available languages is set by service provider.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Language.
3 Select desired language.
4.8.4

Data Setup

This menu item allows you to set up your radio to transmit and receive data from the external device.
Send Feedback
68015000899–FC (en-US)
Chapter 4: Main Menu
89