Operation; Switching On And Off; Working With The Electric Hedge Trimmer - FLORABEST FHT 600 D3 Originalbetriebsanleitung

GB IE CY
Before the work, search the
•
hedge for concealed objects,
e.g. cable etc.
Hold the hedge trimmer cor-
•
rectly, e.g. with both hands on
the handles, if there are two
handles. Loss of control of the equip-
ment may result in injuries.
Wear suitable clothing and
•
work clothes when working
with the equipment. Do not hold
the equipment by the cutting
blade or lift it on the cutting
blade. Contact with the cutting blade
can cause injuries.
• Connect the appliance to a power
socket with a residual current circuit
breaker of rated residual current no
more than 30 mA.

Operation

Do not use the equipment
without the hand guard.
Wear suitable clothing and
work gloves when working
with the equipment. Wear
eye and ear protection. En-
sure that the equipment is
functional before each use.
There is a risk of personal in-
jury and property damage!
The On/Off switch and the
safety switch must not be
held closed. They must switch
off the motor when on is
released. Should a switch
be damaged, stop working
with the equipment. Ensure
that the mains voltage value
matches the label on the
equipment.
There is a risk of electric
shock!
10
Note noise protection and local
specifications.

Switching On and Off

Remove the blade protection (
10) before switching the unit on.
Ensure that you are standing in a
firm position with both hands grip-
ping the hedge trimmer away from
the body.
Ensure that the trimmer is in contact
with no other objects before switch-
ing on.
In this way you avoid damage to
the appliance and possible injury
to people.
1. For tension relief of the cable,
form a loop of the end of the
extension cable and bring this
through the opening at the han-
dle and suspend in the tension
relief at the grip (7).
2. Connect the device to the mains
voltage.
3. Hold the safety switch on the
loop handle (4) and push the
On/Off switch on the grip (6) at
the same time to switch the unit
on. The hedge trimmer will be
run at maximum speed.
4. Release one of the two switches
to switch the trimmer off.
Working with the Electric
Hedge Trimmer
During cutting work, ensure that no
contact is made with objects, e.g.
such as wire fencing or main plant
stems. This may result in damage to
the cutter bar.