Storage; Waste Disposal And Environmental Protection - FLORABEST FHT 600 D3 Originalbetriebsanleitung

GB IE CY
There is a risk of electrocution or of
injury from moving parts.
Wear gloves while handling the
blades. Risk of cuts.
Do not use any cleaning agents or
solvents. These could cause irrepa-
rable damage to the equipment.
Chemical substances can attack the
plastic parts of the equipment.
Carry out the following maintenance and
cleaning work regularly. This will guaran-
tee a long and reliable service life.
• Before each use, check the hedge trim-
mer for obvious defects such as loose,
worn or damaged parts. Check the
secure seating of the bolts in the cutter
bar ( 2).
• Do not use the unit if the blades are
blunt or worn. This will overstress the
motor and gearbox of the machine.
• Check coverings and safety devices
( 1,3) for damage and correct seat-
ing. Replace these where necessary.
• Keep the ventilation slots (
motor housing of the device clean. Use
a damp cloth or a brush to do this. Do
not wash down the equipment with wa-
ter, or submerge it in water.
Clean the cutter bar (2) carefully af-
ter each use. After using the equip-
ment, it is imperative to:
- Clean the blade (with an oily cloth);
- Oil the blade shaft with an oil can
or spray.
12

Storage

• Clean the equipment before putting it
away.
• Keep the trimmer in the blade protec-
tion (
and out of reach of children.
Waste Disposal and En-
vironmental Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure
grade, which allows recycling. Ask our
Service Centre for details.
Defective units returned to us will be dis-
posed of for free.
5) and
10) supplied, in a dry place
Electrical machines do not belong
in domestic waste.