F) General Information On Controlling Model Helicopters - Reely SKY 20 70 77 Bedienungsanleitung

For better looks, the connection cable and the BEC connector (1) are hidden in the fuselage.
Should the swashplate not be aligned perfectly horizontally after power-up, see section "Fine-tuning the model helicopter"
for more information.
Important information!
Before starting to fly your model helicopter, you should take note of the following information.

f) General information on controlling model helicopters

Before operating your model, you should learn about its control features first in order to be able to safely control it. The
double rotor model helicopter is controlled via the two control sticks on the remote control transmitter. The following
functions are available:
 Pitch function
With the pitch function you can control the flying height of the helicopter (see ill 8). The control is effected with the left
control stick (see ill. 1, pos. 8). To that effect, the control stick can be moved forward and backward without it springing
back to the centre position, as is the case with the other control functions.
As the angles of attack of the rotor blades are not modifiable, setting the flying height is effected by a speed modification
of the two main rotors.
Pulling the control stick towards you switches off the motors and the rotors stop. If you push the control stick forward,
the main rotors start up and gain speed depending on the position of the control stick. If the control stick is in middle
position, the rotary speed it high enough as to allow the helicopter to hover.
50
Figure 8