Specifications; Specifications And Technical Data; Fastener Specifications - Max HN120 Betriebsanleitung

2. SPECIFICATIONS AND TECHNICAL DATA

q
w
e
r
t
!3
2. TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED
OPERATING PRESSURE
LOADING CAPACITY
AIR CONSUMPTION

3. FASTENER SPECIFICATIONS

NAIL LENGTH
SHANK DIAMETER
SHANK TYPE
HEAD DIAMETER
HEAD THICKNESS
SHAPE OF THE POINT
RECOMMENDED OPERATING PRESSURE:
210 to 320 p.s.i. (15 to 23 bar). Select the operating air pressure within this range for best fastener performance.
DO NOT EXCEED 320 p.s.i. (23 bar).
!2 !1 !0
o i
y u
!4 !5
HN120
15-3/4© (400 mm)
3-3/8© (85 mm)
12-3/8© (315 mm)
6.4 lbs. (2.9 kg)
210 to 320 p.s.i. (15 to 23 bar)
50 Nails
4.7Rat 322 p.s.i. (23 bar)
PLASTIC SHEET COLLATED NAILS
1-1/4© to 2-1/2© (32 to 65 mm)
.113© to .148© (φ2.9 to φ3.8 mm)
Smooth, Screw
.256© to .303© (φ6.5 to φ7.7 mm)
.039© to .059© (φ1.0 to φ1.5 mm)
DIAMOND POINT
q Exhaust Cover
w Frame
e Nose
r Contact Arm
t Discharge Outlet
y Magazine Cap Lever
u Magazine
i Air Plug
o Magazine Lock Lever
!0 Grip
!1 Trigger
!2 Trigger Lock Dial
!3 Attachment-A (Used for securing a thin steel plate to
the concrete)
!4 Attachment-B (Used for securing a wooden material to
the concrete or a thick steel plate)
!5 Attachment-C (Used for a light gage steel track to the
concrete)
PLASTIC SHEET COLLATED PINS
7/8© to 2© (22 to 52 mm)
.148© (φ3.8 mm)
Smooth
.283© to .315© (φ7.2 to φ8.0 mm)
.079© (φ2.0 mm)
BARISTIC POINT
7