Specifications And Technical Data - Max NF665A/15(CE) Betriebsanleitung

3. SPECIFICATIONS AND TECHNI-
CAL DATA
1. NAME OF PARTS
6
3
2
1
4
9
8
2. TOOL SPECIFICATIONS
PRODUCT NO.
HEIGHT
WIDTH
LENGTH
WEIGHT
RECOMMENDED
OPERATING PRESSURE
LOADING CAPACITY
AIR CONSUMPTION
 The machine has been compactly designed in order to im-
prove operating weight balance.
3. BRAD NAIL SPECIFICATIONS
1-1/4"
32 mm
Wire gauge: 15
1 Frame
2 Cylinder Cap
3 Exhaust Cover
4 Magazine
5 Trigger
6 Grip
7 Warning Label
8 Outlet
7
9 Pusher
5
NF665A/15
322 mm (12-5/8")
94 mm (3-11/16")
322 mm(12-5/8")
1.8 kg (3.97 lbs)
5 to 7 bar
(70 to 100 p.s.i.)
106 Nails
3
1.44 (0.051ft ) at 7 bar
operating pressure
NF665A/15
1-1/2"
1-3/4"
2"
38 mm
2-1/4"
45 mm
2-1/2"
51 mm
57 mm
65 mm
TOOL AIR FITTINGS:
This tool uses a 1/4" N.P.T. male plug. The inside diameter
should be 7mm (.28") or larger. The fitting must be capable of dis-
charging tool air pressure when disconnected from the air supply.
RECOMMENDED OPERATING PRESSURE:
5 to 7 bar (70 to 100 p.s.i.). Select the operating air pressure with-
in this range for best fastener performance.
DO NOT EXCEED 8.3 bar (120 p.s.i.).
4. TECHNICAL DATA
1 NOISE
A-weighted single-event sound power level
A-weighted single-event emission sound pressure level at
work station
These values are determined and documented in accord-
ance with EN12549 : 1999.
2 VIBRATION
Vibration characteristic value
These values are determined and documented in accord-
ance with ISO 8662-11.
This value is a tool-related characteristic value and does not
represent the influence to the hand-arm-system when using
the tool. An influence to the hand-arm-system when using
the tool will, for example, depend on the gripping force, the
contact pressure force, the working direction, the adjust-
ment of mains supply, the workpiece, the workpiece sup-
port.
5. APPLICATIONS
 Door and window casings
 Plywood, decorative boards, and other interior finish works
 Panel assembly and moldings
 Sub flooring
 Furniture assembly including drawer assembly, case back
nailing, blind pinning, and other finishing works
 Cabinet assembly
7
------ LWA, 88.8 dB
Uncertainty (KWA): 3 dB
------ LpA, 87.2 dB
Uncertainty (KpA): 3 dB
2
= 3.04 m/s
2
Uncertainty(K): 1.5 m/s