C) Shifting "Hms 100 Z" Into The Maintenance Mode - Conrad Electronic Rm 100-2 Bidi-S Bedienungsanleitung

c) Setting "HMS 100 Z" in the maintenance mode

This set up is necessary only if the smoke detector functions in
the "HMS 100" system!
• Press, in the normal mode, on the "MENU" button. „Störungen
bearbeiten bearbeiten
bearbeiten bearbeiten" appears on the display (= "Handling failures"). bearbeiten
• Select via the rotary encoder or the " " and " " buttons the menu item
„Sensor einstellen Sensor einstellen Sensor einstellen Sensor einstellen" (= "set up sensor"). Sensor einstellen
• Press the "OK" button.
• Select via the rotary encoder or the " " and " " buttons the menu item
"sensor maintenance".
• Press the "OK" button.
• Now you can, with the " " and " " buttons, limit the selection of the sensors
to the sensor type "smoke detector". The other sensors are removed from
the symbol line.
• Select via the rotary encoder the desired sensor/smoke detector.
• Press the "OK" button.
Sensorsuche" (= "search sensor") is displayed and below it the name of Sensorsuche Sensorsuche
Sensorsuche
• „Sensorsuche
the concerned sensor.
• Now change the batteries in the smoke detector as described in chapter
13. d).
• Close the maintenance mode, see chapter 13. f).
76
Störungen Störungen
Störungen Störungen