Conrad Electronic RM 100-2 BiDi-S Bedienungsanleitung Seite 64

• The entry of a name is completed by pressing on
"OK". The message illustrated in the adjacent figure
appears on the display of the control center.
To register another smoke detector at the control
center, place 3 batteries in the smoke detector as
described in chapter 10. f).
Proceed as with the first smoke detector; see the
corresponding chapter.
• When all smoke detectors have been registered, the
procedure is ended by pressing three times on
the" C" button.
• The control center is in the normal display mode again
(main plan).
64
Sensor
frei
unscharf
16:30 14.12
X