Maintenance And Cleaning - MC Crypt DM-19 Bedienungsanleitung

10. Maintenance and Cleaning

Check the technical safety of the product and the connected appliances at regular intervals, e.g. for damages to the
housing or the power cable.
If safe operation can no longer be assured, put the product out of operation and protect it from being used again
accidentally! Always pull the power plug out of the socket!
Safe operation can no longer be assumed if
• the appliance shows visible damage,
• the appliance no longer works and
• after long storage under adverse conditions or
• after heavy transport strain.
Make sure you observe the following safety notices prior to cleaning or servicing the product:
Prior to cleaning, maintenance or repair work, separate the appliance from all voltage sources
and pull the power plug out of the outlet! Merely turning the computer off via the on/off switch
is not sufficient!
There are no parts that need to be serviced by the user on the inside of the product; the housing
may not be opened.
Repairs may only be conducted by experts who are familiar with the associated risks respectively
the pertinent regulations.
Dust can be easily removed with a vacuum cleaner and a soft, clean brush. Do not point the opening of the vacuum
cleaner nozzle directly onto the dials/sliders, as these may become loose and get sucked into the vacuum cleaner.
This may also cause scratches.
You can also use a soft, dry and lint-free cloth for cleaning the outside of the product.
If necessary, wet the cloth lightly with lukewarm water.
Do not use any aggressive cleaning agents or chemical solutions as these may damage the surface of the product
or impair its function.
Wait until the mixing desk is completely dry prior to re-connecting it to the mains voltage.
34