12. Troubleshooting
Errors are indicated by signal tones and by a cyclical fl ashing sequence of all status LEDs.
You can use the table below to assign the signal tones and LED displays:
Signal
tone
Once
-
Twice
Twice in succession
Three
Three times in
times
succession
Four times
Four times in suc-
cession
13. Technical Data
Input voltage (USB power unit) ......................................................... 100-240 V/AC 50 Hz
Output voltage (USB power unit) ...................................................... 5 VDC/0.85 A
Micro SD card, max. ......................................................................... 32 GB
Resolution, max. ............................................................................... 1280 x 1024 / 8 fps
Dimensions (LxWxH) ........................................................................ approx. 25 x 49 x 72 mm
Weight .............................................................................................. 87 g
42
Status LEDs
Status
Fault with the power
supply
Error with SD cards
Error with CMOS
Weak battery
Remedy
Check the power connection
Charging the battery
Check SD card, format SD
card
Contact Service
Charging the battery