Troubleshooting; Intended Use; Safety Notices - Conrad 75 03 92 Bedienungsanleitung

Observe the following safety notices under all circumstances
prior to cleaning or servicing the camera or the connected
power pack.
When opening the covers or removing parts of the
casing, you may expose live parts.
Therefore, you have to disconnect the appliance from
all voltage sources and connections prior to performing
maintenance or repair work.
Condensers in the appliance may still be charged, even
if the appliance was disconnected from all voltage sour-
ces.
Disposal
Dispose of obsolete appliances according to the valid legal direc-
tives.
Other repairs than the ones described above may only be conduc-
ted by an expert.

Troubleshooting

With this camera, you have purchased a product that reflects the
latest state of technology and is safe to operate.
Still there might be problems or malfunctions. At this point, we want
to tell you how to easily remedy possible malfunctions yourself.
Observe the safety notices under all circumstances!
22

Intended Use

The DOME camera serves for monitoring and securing hard to
observe or critical spots (for shop monitoring, in door intercoms, in
entrance sections, etc.) and for playing back the recorded images in
any suitable TV or monitor with an AV input.
The camera may only be used in dry interior rooms.
Please note that it is a criminal offence to observe strangers with
this camera without their knowledge and consent
The product may only be operated with 12 V DC voltage.
Another use than the one described above is not permitted and may
lead to damages to the product. In addition, this is connected to
risks like short circuit, fore electric chock or similar.
The entire product may not altered or modified.
The safety notices have to be observed under all circumstances!

Safety Notices

Damages caused by non-compliance with this ope-
rating manual lead to an expiration of the warranty!
We will not assume any liability for subsequent
damages!
We will not assume any liability for damages to
items or persons caused by improper handling or
non-compliance with the safety notices! Any gua-
rantee claims will be null and void in such cases.
For reasons of safety and licensing (CE) it is not allowed to alter res-
pectively modify the camera.
15