B) Manual Recording Without Memory Limit - Conrad 75 28 09 Bedienungsanleitung

b) Manual recording without memory limit

In this setting, older recordings (without manually ending) are overwritten when the memory
capacity is reached.
Proceed as follows:
Press the 'POW/REC' key (13) to switch on the
product.
The status LED (10) lights up red. This indicates
that your product is switched on and is in 'stand-
by' mode.
Press the 'LOOP/MOTION' key (11) until the
blue status LED (9) is continuously lit.
Start recording
Press the 'POW/REC' key (13) again to start recording.
The status LED (10) starts to fl ash red. This indicates that your product is recording.
The blue status LED (9) should be continuously lit.
Terminating recording
Press the 'POW/REC' key (13) again.
The status LED (10) is continuously red. This indicates that your product is back in 'stand-by'
mode.
36
9
11
10
13